Skip to main content

Khomp/Commands

About​

This document covers information about Khomp Commands.

Khomp/Commands​

  • khomp channels disconnect : Disconnect one or more channels. This command sends a message directly to the physical channel of the card in question, requesting a disconnection. Use with caution;
  • khomp channels unblock : Unlock blocked channels for input or output. Only available in digital signage via E1;
  • khomp clear links: Clears error counters on the links;
  • khomp clear statistics: Clears the statistics of channel connections, or statistics for a particular channel;
  • khomp get : Gets the number of options Endpoint Khomp;
  • khomp kommuter : Enables or disables kommuters connected via USB on this machine. Only accessible when the configuration "kommuter-activation" is set to "manual".
  • khomp kommuter count: Gets the amount of kommuters connected via USB on this machine;
  • khomp log console: Sets options in the console logs;
  • khomp log disk: Sets logging options to disk;
    • khomp log console and khomp log disk have auxiliary options No, which reverses the selection of messages, and just, which generalizes the choice. Examples:
      • khomp log disk just commands events (Enables only logging to the disk of commands and events);
        • khomp log disk no commands (Disable logging to the disk of commands sent to board);
        • khomp log disk warnings (Enables also logging to the disk of warnings from Endpoint).
    • More information on options for the log command, type: "help khomp log disk" or "help console log khomp".
  • khomp log rotate: Rotate log files from the Endpoint;
  • khomp log status: Shows log messages currently being written to disk and displayed on the console;
  • khomp log trace isdn: Enable Debugging ISDN signaling;
  • khomp log trace k3l : Enables debugging low-level API K3L;
  • khomp log trace r2 : Enables debugging low-level signaling R2/MFC;
  • khomp reset links: Sends a reset command for a specific E1 of a particular card;
  • khomp revision: Shows version number and revision of the Endpoint;
  • khomp select sim: Select the SIM card, available on the boards KGSM;
  • khomp send command : Sends command API K3L directly to the board (only for debugging, may compromise the stability of the system if used improperly);
  • khomp send raw command : Sends a command directly to the DSP board (only for debugging, may compromise the stability of the system if used improperly);
  • khomp set : Sets various options of the Endpoint Khomp;
  • khomp show calls : Shows states for calls, may also listing specific channels or boards;
  • khomp show channels : Shows the status of the channels Khomp and may also list specific adapter;
  • khomp show links: Display states of E1 links available.
  • khomp show statistics : Shows the statistics of channel connections, or statistics for a particular channel;
  • khomp sms : Send an SMS message for a given number, using KGSM channels;
  • khomp summary : Prints a summary of system boards and their features;